Skip to content
As a BMW owner, I know how important it is to keep my car running smoothly.
Regular maintenance isn’t just about oil changes and tire rotations—it’s about understanding the health of every system under the hood.
That’s where this scan tool for BMW Ancel BM700 comes in. After using it for a while, I can confidently say it’s an absolute must-have for anyone serious about maintaining their BMW.
Full OBD2 Modes
I’ve used a lot of diagnostic tools in the past, but what really impressed me about this scanner for bmw is the full OBD-II modes.
For anyone who doesn’t know, OBD-II (On-Board Diagnostics) is a universal system that almost all modern cars use to monitor their performance.
Ancel Bm700 supports OBDII diagnostics across all car brands, which means it’s not limited to just BMWs.
Whether I’m working on my BMW or a friend’s car, the tool offers a comprehensive array of diagnostic functions—engine codes, transmission issues, and even electrical malfunctions—ensuring I can dig deeper into any problem.
It doesn’t matter if I’m dealing with a simple check engine light or more complex issues; this tool has the capacity to handle it all.
All System Scan Tool
Unlike basic code readers that just pull engine codes, this tool scans every available module in the vehicle.
That means it checks everything from the engine control unit (ECU) to the air conditioning system, brakes, and even the transmission. The tool gives me a full picture of my car’s health, which I can’t say enough how crucial that is.
When I first used this feature on my BMW, I was amazed at how quickly it pinpointed a sensor issue I didn’t even know existed.
The tool was able to provide not just a code, but a comprehensive diagnosis of the faulty sensor, helping me avoid future repairs that would have cost a lot more had I not caught it in time.
Related Reading: BMW Fault Codes: Common Problems and Fixes
BMW Specific Diagnosis
The most impressive part of this scanner for bmw is that it’s designed specifically for BMWs.
BMW battery registration is a crucial feature. Whenever you replace the battery in your BMW, the new battery must be registered with the car’s system for everything to work properly.
I recently replaced my car’s battery, and thanks to the BMW scan tool, I was able to perform the battery reset function easily.
All I had to do was follow the steps: turning on the dashboard without starting the engine, connecting the tool, selecting the chassis model, and finally, registering the new battery. Simple, right?
If I hadn’t done this, the vehicle’s computer wouldn’t recognize the new battery and could have caused problems down the line.
However, a heads-up: Ancel BM700 doesn’t support changes to the battery’s type or capacity. So, if you replace an AGM battery with a lead-acid one, or if the battery specs differ, you’ll need to reprogram your car in addition to performing the reset.
Works on More Than Just BMWs
The tool isn’t just for BMWs—it works on most vehicles from 1996 to the present.
I’ve used it on a friend’s 2005 Audi, and it performed just as well as it does on my BMW. This means that whether you’re a DIY mechanic or you just like to tinker with cars, this scanner for bmw will serve you across a wide range of vehicles.
Easy to Use
At first, I was a little concerned about how difficult this tool might be to use—especially since I’ve used some diagnostic tools that were clunky and confusing. But I was pleasantly surprised by how user-friendly this one is. It comes with complete operating instructions, and the interface is incredibly intuitive. There’s no fumbling around, trying to figure out what button does what. I connected the tool, selected the function I wanted, and it walked me through the process step by step.
Even if you’ve never used a diagnostic tool before, this scan tool takes all the guesswork out of the equation. It’s clear, straightforward, and easy to navigate.
Additional Functions That Make This Tool Stand Out
Beyond the basic functions, this scanner for bmw for bmwl comes packed with additional features.
SAS Calibration
If you’ve ever had issues with your steering wheel not returning to center, you’ll appreciate the Steering Angle Sensor (SAS) Calibration. This function allows you to calibrate the steering angle sensor, ensuring that the sensor correctly recognizes the straight-ahead position. After calibration, the tool automatically clears any related fault codes, saving you time and money at the repair shop.
Airbag Reset
One of the most annoying issues is the dreaded airbag warning light. This tool can read and clear DTCs (Diagnostic Trouble Codes) related to the SRS (Supplemental Restraint System). It helps me locate faults in the airbag system and clear the warning light, so I don’t have to worry about unnecessary trips to the dealership.
DPF Regeneration
If you own a diesel BMW, you’ll appreciate the DPF Regeneration function. This feature lets you reset DPF-related codes, manage the injection rate, and burn off accumulated particles in the Diesel Particulate Filter when it reaches maximum fill levels. It’s a vital function for keeping your diesel engine running efficiently and extending the lifespan of your exhaust system.
ABS Bleeding
Whenever I replace parts of the brake system—whether it’s the brake fluid or the master cylinder—the ABS bleeding function ensures that air doesn’t get trapped in the brake lines. This function allows for proper brake system bleeding, ensuring that the ABS system performs optimally when I hit the road.
Transmission Learn
This function monitors the transmission’s performance, checking fluid temperature, pressure, and dutch actuation. It helps ensure that the transmission is operating efficiently, improving the vehicle’s overall driving experience. I’ve noticed smoother shifting since I started using it.
Worth Every Penny
After using this BMW scan tool for several months, I can confidently say it’s the best bmw scanner tool for BMW owners. The level of detail and diagnostic capabilities it provides are invaluable.
Whether it’s the ability to perform specialized BMW functions like battery registration and SAS calibration or the broad compatibility with all car brands, this tool offers unmatched versatility.
It’s a one-stop shop for anyone serious about vehicle maintenance, and its user-friendly design makes it accessible to both professionals and beginners alike.
If you’re looking to take your BMW maintenance to the next level, this scan tool is worth every penny. Trust me—you won’t regret it.
FAQs
Does the Ancel BM700 support transmission diagnostics?
Yes, the Ancel BM700 can read and clear fault codes related to the transmission system. It also displays live data such as fluid temperature, which helps identify issues in the transmission early on.
Are there any special considerations when replacing the battery in a BMW with the Ancel BM700?
Yes, the tool will only work if the new battery has the same specifications (type and capacity) as the old one. If you’re switching battery technologies (e.g., from lead-acid to AGM), the car may need to be reprogrammed in addition to performing the reset. Note that some BMW models like the E46, E39, E38, etc., don’t require battery registration, so you can replace the battery directly without using the tool.
Does the Ancel BM700 work with other car brands?
While it’s primarily designed for BMWs, the Ancel BM700 is OBD-II compatible and works with a wide range of vehicles from 1996 onwards, not just BMWs. It provides general diagnostic capabilities for many other car brands, making it a multi-functional tool for car enthusiasts.
