Skip to content
The maintenance light on a Toyota vehicle is a crucial reminder for regular upkeep. This light, which typically illuminates every 5,000 miles, alerts you to necessary services like oil changes.
Ignoring this light can lead to significant problems, reduced engine performance, and decreased fuel efficiency.
To keep your vehicle running smoothly, it's essential to understand how to reset this light after performing the required maintenance.
Step-by-Step Guide to Resetting the Maintenance Light
If your maintenance required light comes on, here’s how you can reset it:
-
Turn the Key to the "On" Position: Insert your key into the ignition and turn it to the "On" position without starting the engine.
-
Press and Hold the Trip Meter Reset Button: Locate the trip meter reset button on your dashboard. Press and hold this button.
-
Turn the Key to the "Off" Position: While still holding the trip meter reset button, turn the key to the "Off" position.
-
Turn the Key Back to the "On" Position: Keep holding the button and turn the key back to the "On" position. Continue holding the trip meter reset button for about 10 seconds.
-
Release the Button: Once the maintenance light flashes and goes out, release the trip meter reset button. The maintenance light should now be reset.
-
Using DS300 (OBD2 Scanner): Utilizing a tool like the DS300 can simplify the process. Connect the scanner to your vehicle’s OBD2 port, follow the prompts to navigate to the maintenance reset function, and complete the process electronically.
Related Reading: Easily diagnose injector issues like a pro with this simple scan tool
How to Reset the Maintenance Light on Different Toyota Models
The process for resetting the maintenance light can vary slightly depending on the Toyota model you own. Here’s how you can reset the light on a few popular models:
-
Toyota Camry
Turn the ignition key to the "On" position without starting the engine.
Press and hold the trip meter reset button on the dashboard.
While holding the button, turn the ignition key off, then back to the "On" position.
Continue holding the button until the maintenance light goes out.
- Toyota Corolla
Insert the key and turn it to the "On" position.
Press and hold the trip reset button until the central screen displays Trip A.
Turn the key back to the "Off" position.
Press and hold the reset button again while turning the key back to the "On" position.
Hold the button until the odometer displays zeros and the maintenance light turns off.
- Toyota RAV4
Turn the ignition to the "On" position without starting the engine.
Press the trip meter reset button and hold it.
Turn the ignition off while continuing to hold the button.
Turn the ignition back to the "On" position and hold the button until the maintenance light resets.
- Toyota Tacoma
Turn the ignition to the "On" position without starting the engine.
Press and hold the odometer reset button.
Turn the ignition key to the "Off" position.
Turn the key back to the "On" position while continuing to hold the odometer reset button.
Keep holding the button until the maintenance light turns off.
How Often Should the Maintenance Light Be Reset
The maintenance light should be reset every time you complete the required maintenance, typically every 5,000 miles.
This process ensures that the system accurately tracks the intervals for future maintenance.
Failing to reset the light after service can cause confusion and lead to missed maintenance schedules.
What to Do If the Maintenance Light Stays On
If the maintenance light remains on after performing the reset procedure, it may indicate that the reset was not successful or there is an underlying issue with your vehicle. Here are several steps you can take:
-
Repeat the Reset Process: Try repeating the reset procedure to ensure it was done correctly.
-
Check the Owner’s Manual: Consult your Toyota’s owner’s manual for model-specific instructions. Each model might have slight variations in the reset process.
-
Disconnect the Battery: Disconnect the car battery for a few minutes. This can reset the vehicle’s computer system, which may turn off the maintenance light. Reconnect the battery and check if the light is off.
-
Use an OBD2 Scanner: Using an OBD2 scanner like the DS300 can help diagnose any underlying issues and reset the maintenance light.
-
Visit a Service Center: If the light remains on, it’s best to visit a Toyota service center to have a professional diagnose and resolve the issue.
Driving with the Maintenance Light On
Driving with the maintenance required light on is possible but not advisable.
This light is a reminder that your vehicle needs service, oil changes, or tire inspections. Ignoring it can lead to decreased engine performance, reduced fuel efficiency, and potential damage to other vehicle parts.
If other warning signs like vibrations, unusual sounds, or decreased engine performance accompany the light, it might indicate more severe problems.
Always address the maintenance light promptly to keep your vehicle in optimal condition.
Conclusion
Ensuring the maintenance light on your Toyota is reset after each service is crucial for tracking your vehicle's maintenance schedule accurately.
Regular maintenance not only keeps your car running smoothly but also helps in avoiding costly repairs down the road.
Using tools like the DS300 OBD2 scanner, you can streamline the process and ensure its accuracy.
Always consult your owner’s manual or visit a professional if you encounter any issues during the reset process.
FAQs
What does the maintenance required light mean?
The maintenance required light is a reminder that your vehicle is due for routine maintenance. It typically comes on after driving a specific number of miles (usually 5,000) since the last reset. This light is not an indicator of a malfunction but a reminder to perform scheduled maintenance like oil changes and inspections.
Will the maintenance light reset itself after an oil change?
No, the maintenance light will not reset itself after an oil change. You need to manually reset it following the procedure for your specific Toyota model. This ensures the system accurately tracks when the next maintenance is due .
Is it necessary to reset the maintenance light after each service?
Yes, it is necessary to reset the maintenance light after each service. This allows the vehicle’s computer to accurately track mileage and remind you of the next service interval. Not resetting the light can cause confusion about when the next maintenance is due。
Recommended Similar Articles：
- Easily identify and repair your car's evaporative emission system leak for a smoother drive
- Key Immobilizers & The Value of Key Reprogramming Tools
- Multimeter vs. Battery Tester: What Is the Difference?
- Save on car repairs by using the ANCEL S3000 professional car smoke tester
- Keep Your Fleet Running Smoothly with These Essential Battery Care Practices
