Zum Inhalt springen
Friends who enjoy riding motorcycles, hello! If you own a bike, you are aware of the importance of regular maintenance to maintain your two-wheeled beauty purring like a kitten on the open road. But let's face it, there are a lot of myths about motorcycle maintenance that circulate. Do not be alarmed; we are here to dispel these rumors and provide the truth. Get ready for a thrilling journey through the reality of motorcycle maintenance by grabbing your helmet now!
Maintaining a motorcycle requires you to be a mechanic
It's a frequent misconception that only a skilled mechanic with grease-covered hands can conduct motorcycle maintenance. But what's this? That's not exactly accurate! With the correct equipment and experience, you can complete a lot of repairs and maintenance activities on your own even if some may call for professional assistance.
Investing in a trustworthy motorbike code reader, such as the Ancel MT700, might be extremely beneficial. Without having a degree in engineering, you can identify problems with your bike using this handy device. It interprets the motorcycle's diagnostic fault codes and offers insightful information about probable issues, all of which are shown on a user-friendly interface.
It's not required to change the oil frequently
Imagine yourself driving down the highway with the breeze in your face and the motor merrily humming. But hold on, when did you last change the oil? Neglecting oil changes is a dangerous mistake that can eventually cause serious damage to the engine of your motorcycle.
Consider the oil as the bike's vital organs. It lubricates the moving components of the engine to lessen friction and stop wear. The oil degrades over time and loses its effectiveness. As advised in your motorcycle's manual, routine oil changes will keep your engine in excellent condition and guarantee a comfortable ride for many years.
It's Okay to wash your motorcycle with dish soap
We understand that cleaning your motorcycle isn't the most enjoyable activity. You may also think, "Hey, why don't I use some dish soap?" in a pinch. I suppose soap is soap. Wrong!
It can be disastrous to clean your motorcycle with dish soap. It's abrasive and can remove the wax layer, making the paint of your bike susceptible to dings and fading. Choose materials designed specifically for cleaning motorcycles instead. Your vehicle will seem clean and shining without losing its integrity thanks to the fact that these are made to clean without harming the paint or delicate components.
Relevant:Troubleshooting Common Motorcycle Electrical Problems
It's Required to Let Your Motorcycle Warm Up for a Long Period of Time
You may have observed other riders waiting what seemed like an eternity before getting on the road. But the truth is that contemporary motorcycles don't require lengthy warm-up times.
Modern engines are made to warm up quickly, so leaving them idling for an extended period of time wastes fuel and wears down the engine prematurely. A quick warm-up of between 30 and 60 seconds is adequate. So, avoid unnecessary delays and start moving to save time and gasoline.
"All motor oils are the same," debunked
Ah, the great argument over motor oil! Although there are many different motor oils available, not all of them are the same. There are precise recommendations for the kind and viscosity of oil that each motorcycle manufacturer feels is best for their engines.
To find out what motor oil is best for your motorcycle, consult the manual or talk to a professional. The incorrect oil choice might result in damaged engines and poor engine performance. Therefore, use the proper oil and don't gamble with your bike's health!
A quick oil change is preferable to a full one
You might believe that topping off your bike's oil level with a little fresh oil every now and then is just as effective as an entire oil change. Unfortunately, it's not quite that easy.
In an emergency, topping off can be helpful, but it's not a replacement for a complete oil change. Over time, pollutants and particles build up in the oil that a top-up cannot remove. Don't cut corners on this crucial maintenance task if you want to keep your engine clean and in good condition.
Conclusion
Maintaining a motorcycle doesn't need to be a secret or difficult job. By eliminating these common myths, we forge the path to a smoother, more comfortable ride. Remember that there are many maintenance tasks you can perform yourself, with the right tools (like Ancel MT700 motorcycle code reader) and a little knowledge to keep your favorite motorcycle in tip-top shape.
Click here to learn more about Ancel OBD2 Scanner Maintenance and Repair.
FAQs
Q1: How does a code reader for motorcycles operate?
A motorcycle code reader, such the Ancel MT700, attaches to your motorcycle's diagnostic port and reads the troubleshooting information contained in the computer of the vehicle. These codes offer details about potential difficulties, enabling you to identify and effectively address issues.
Q2: How frequently should I change the oil in my motorcycle?
The make and type of your motorcycle determines how frequently you should replace the oil. Generally speaking, the manufacturer's recommendations or every 3,000 to 5,000 miles should be followed while changing the oil.
Q3: Can I clean my motorcycle with any soap?
No, using standard dish soap or abrasive cleaners can harm the paint and finish on your motorcycle. The best motorbike cleaning products are those designed specifically for keeping the beauty of motorcycles.
