When your car's check engine light turns on, it is often accompanied by a diagnostic trouble code stored in the car's computer system. These codes are crucial for identifying the source of the problem. While professional mechanics often use a scanner or OBD2 reader to retrieve these codes, there are methods to reset these codes without such tools.
Resetting Codes Manually
Disconnecting the Battery
One of the simplest methods to reset your car's diagnostic codes is by disconnecting the battery.
Follow these steps:
- Ensure Safety: Make sure the car is off and the keys are removed from the ignition.
- Locate the Battery: Open the hood and locate the battery.
- Disconnect the Negative Terminal: Use a wrench to loosen the nut on the negative terminal and disconnect it. Wait for about 15 minutes.
- Reconnect the Negative Terminal: After the waiting period, reconnect the negative terminal and tighten it securely.
This method clears the memory of the car's computer system (ECU), including any stored trouble codes. However, it also resets other systems, so you may need to reset your car's clock and radio presets.
Related Reading: Will Ancel Read Check Engine Codes
Key On-Off Method
Another technique to try is the key on-off method, which can work for some vehicles:- Key in Ignition: Insert the key into the ignition.
- Turn to "On" Position: Turn the key to the "On" position but do not start the engine. Wait for three seconds.
- Turn Back to "Off" Position: Turn the key back to the "Off" position.
- Repeat: Repeat this process three to five times.
This method may trigger the computer to perform a soft reset, potentially clearing the codes.
$109.99
Using Fuse Removal to Reset Codes
Locating the Relevant Fuse: Check your car's manual to find the fuse that is linked to the diagnostic system:
- Access the Fuse Box: Open the fuse box, which is typically located under the dashboard or in the engine compartment.
- Identify and Remove the ECU Fuse: Carefully remove the fuse associated with the ECU. Hold it out for approximately one minute.
- Reinsert the Fuse: Place the fuse back into its slot and ensure it's securely installed.
Removing the ECU fuse can serve as a hard reset for the car's computer system, clearing all codes and data. Be aware that this might also reset other electronic settings.
Driving the Car to Reset Codes
In some instances, driving the car can naturally reset the diagnostic codes. This method is often referred to as a "drive cycle," and it allows the car's system to recalibrate and check if the issue that caused the code has been resolved. Here’s how you can perform a drive cycle:
- Follow a Driving Pattern:Start with a cold engine and drive smoothly with varying speeds for about 10 to 20 miles.
- Include a Mix of Driving Conditions:Include a combination of city driving and highway driving to ensure the computer system checks all parts of the engine functionality.
This method is particularly useful as it not only resets the codes but also provides feedback on whether the issue persists, indicating further mechanical attention might be necessary.
Car Scanner is the Best Option to Solve the Problem
In instances where you lack the necessary tools to diagnose why your check engine light is activated, investing in a specialized car scanner is a wise choice. A high-quality car scanner not only assists with pinpointing the exact issue behind the check engine light but also potentially saves substantial amounts on auto repairs. One of the top brands in the market is ANCEL, renowned for its range of effective and user-friendly auto repair scanners.
You can explore a variety of models tailored to different needs and budgets directly on ANCEL's official website, ensuring you choose the best tool to keep your vehicle running smoothly and efficiently.
FAQs
What should I consider when buying a car scanner?
Evaluate what you need from a scanner—basic diagnostics, specific vehicle compatibility, or advanced features. Also, consider the ease of use, the quality of customer support, and the availability of updates to the device’s software.
Where can I buy a car scanner?
Car scanners can be purchased at automotive stores, online retailers, or directly from manufacturers. Be sure to buy from reputable sellers to ensure authenticity and receive reliable customer service.
Why is my car scanner not turning on when connected to the OBD port?
Check if the vehicle’s ignition is on, as some scanners require the engine to be on or in accessory mode. Also, verify the scanner's connections and ensure the OBD-II port isn’t damaged.